600 WOG / FULL PORT
TWO PIECE BRASS BALL VALVE
FEATURES :
Conforms to specification of MSS-SP-110
All sizes rated 600 WOG / 150 WSP
Blowout-proof stem
BS21 End connection
ANSI (NPT) B1.20.1 End connection also available
Two-piece construction with a chrome plated brass ball
Double “O”-ring stem seal and PTFE seats
Quick quarter-turn for easy operation
Application :
Water, Oil, Gas (residential), and Steam
Approvals: (for AKSZA)
CSA : 1/2 psig at the appliance
CSA : 5 psig from the appliance to the meter
CSA : 125 psig from the meter to the street
UL / FM : for Fire protection
Note : CSA – Canadian Standards Association
Consolidation of the American Gas Association (AGA) and the Canadian Gas Association (CGA)
UL - Underwriter’s Laboratories
FM - Factory Mutual
FIG no. SZA ( for BS 21 thread ends )
AKSZA ( for ANSI/NPT thread ends ) – CSA, UL, FM Approval
Maximum Working Pressure
Working Pressure Non-Shock (psi) Test Pressure (psi)
Saturated Steam Cold Water Oil Gas Shell
(Air)
Seat
(Air)
150 600 900 80
Note: For more details, please refer to P-T rating chart.
Effective Length of Thread (MM)
Size 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2”
Super Z 8.5 9 12 13 15.5 16.5 16.5 19.5
ZA 7.5 8 10 11 12 13 14 16.5
Fig no. SZA / AKSZA
*Advisory Note :
Please be advised that applications in this shaded zone
will reduce the service life of the valve.
Packaging Data
1/4” 3/8” 1/2” 3/4” 1” 1.1/4 1.1/2” 2”
Pcs per Master carton 96 96 72 60 36 36 16 6
Pcs per Inner carton 12 12 12 10 6 6 4 4
1-10-1, Nakase, Mihama-ku, Chiba 261-8577, Japan
International Sales Dept. Phone : 81-43-299-1732/1733 Fax: 81-43-299-0121
DIMENSIONS /Cv's
NOMINAL
SIZE dHD1LS1Cv
VALUE *
1/4 10 37 70 42 20 4.2
3/8 10 37 70 42 22 7.6
1/2 15 40 80 53 26 20.0
3/4 20 43 80 60 32 40.0
1 25 49 110 72 39 66.0
1-1/4 32 55 110 84 48 120.0
1-1/2 40 64 150 92 55 195.0
2 50 72 150 110 68 310.0
* Cv - Flow rate in US GPM at a pressure drop of 1 psi
UNIT: MM
Fig no. SZA / AKSZA
P-T Rating
M ATERIALS :
NO. Q'TY
11Forged Brass ( B283 No.C37700 )
21Forged Brass ( B283 No.C37700 )
31Brass Rod ( B16 ) (3)
41Forged Brass ( B283 No.C37700 ) (1)
91Carbon Steel (2)
10 1 Carbon Steel
30 2 PTFE
45 2 FPM
47 1 PBT (4)
Test
Pressure
ANSI B 16.18 ( for CSZA )
NOTE
1) Cr PLATING
(2) ZINC DICHROMATE PLATED AND PLASTIC COVERING
(3) Ni PLATING
(4) POLYBUTYLENE TEREPHTHALATE
@@ @@ ANSI B 1.20.1 ( for AKSZA )
MATERIALS
Standard Face to Face or End to End : KITZ Standard
Shell : 900 PSI ( Hydrostatic )
Seat : 80 PSI ( Air )
O ring
Thrust Washer
Wall Thickness : KITZ Standard
End Connection : BS 21 ( for SZA )
PART
Body
Ball
Handle
Body Cap
Stem
Handle Nut
Ball Seat