daongochungbk
Thành Viên [LV 6]
Xin chào các đồng nghiệp,
Xin thông baó với mọi ngươi một tin vui là bản Revit 2011 chuẩn bị xuất bản. Và theo thông tin của Autodesk công bí thì nó được cập nhật một số chức năng khá hay. Tuy chưa dùng, nhưng đọc qua thì thấy nó đạp ứng được thêm 40% (trong 100% mong muốn của cá nhân tồi với REVIT 2011).
Có thể nói trong Revit MEP thì E chưa được quan tâm lắm trong các bản trước, chính vì vậy E được ưu ái quan tâm cập nhật hơn.
Thời gian phát hành chính thức:
AutoCAD® Revit® Architecture Suite 2011 April 8
AutoCAD® Revit® MEP Suite 2011 April 8
AutoCAD® Revit® Structure Suite 2011 April 8
Autodesk® Revit® Structure 2011 April 8
Autodesk® Revit® Architecture 2011 April 8
AutoCAD® Structural Detailing 2011 April 8
Autodesk® Robot™ Structural Analysis 2011 April 12
Autodesk® Buzzsaw® April 17
AutoCAD® Civil 3D® 2011 April 20
Autodesk® Ecotect® Analysis April 20
Autodesk® Constructware® April 24
AutoCAD® Architecture 2011 March 25
AutoCAD® MEP 2011 March 25
AutoCAD® Map 3D 2011 March 29
Autodesk® Navisworks® Freedom 2011 April 2
Autodesk® Navisworks® Manage 2011 April 2
Autodesk® Navisworks® Simulate 2011 April 2
Xin tóm lược lại một số tính năng mới của Revit MEP 2011 (RAC, RST cũng tương tự).
Một số cải tiến chung:
- Đặt các đối tượng MEP trong các Elevation.(tôi đang mong đợi)
- Đặt các fittings/valves trong cả Section, Elevation. (tôi đang mong đợi)
- Khi vẽ hệ thống Piping mà thiết lập dùng nối bích (flange) thì mặt bích tự động được chèn vào. (tôi đang rất mong đợi - đàn anh của nó là AutoCAD MEP lầm tốt điều này)
- Thư viên Electric thêm mới nhiều.
Conduit and Cable Tray
- Có thêm conduit and cable tray (tôi đang rất mong đợi - đàn anh của nó là AutoCAD MEP lầm tốt điều này).
• Better, more complete coordination with other disciplines
• Model with or without fittings
• Adjustable bend radius for bends
• Schedule total length of run when not using fittings
• Surface connectors on equipment:
• Enable an entire surface to be connectable for conduit placement
• Added to the appropriate electrical equipment families
• Connect conduit to cable tray
Thuộc tính bảng Panel Schedule
- Định dạng theo templete.
- Lock circuits
- Group circuits
- Move circuits
- Cân bàng tải
Demand Factors (trong Manage/Electric Setting)
- Hỗi trợ thêm các tiêu chuẩn hệ số yêu cầu (Demand Factors) cho công nghiệp.
- Người dùng có thể tự định nghĩa loại tải.
- Tải yêu cầu được hiển thị trong bảng thống kê Tủ điện (panel schedules).
- Dùng Transfer Project Standards để copy.
Duct Oval
- Thêm loại ống oval
- Có thể dùng công cụ Sizing
Revit Extensions
- Chuyển đổi các tham số được chia sẻ (Shared Parameters)
- Model Review
- Autodesk Revit DB Link
Tài liệu trợ giúp người dùng:
- Chuyển tiếp trực tiếp đến web trợ giúp và có nhiều chức năng tìm kiếm nâng cao.
- Kèm những Video hướng dẫn ngắn rất trực quan.
- Các tooltip được tăng cường (số lượng, nội dung).
- Có thêm tooltip linh động mới.
- Phần phụ lục trong Help cho phần phân tích tính toán.
Anh văn cùi bắp dịch lâu quá, phù phù...
Các bác đọc tiếng Anh:
User Interface Enhancements
• Modeless Properties Palette
• Repeat last command / Repeat Commands recently used
• Quick Access Toolbar (QAT):
• Single QAT per application
• Increased number of default commands in the QAT
• Customization options via dialog box: move command up/down, add separator, remove
command
• Improved access to Worksets and Design Options on status bar
• Ribbon Enhancements:
• Redesigned Modify tab:
• Consistent modify tools - panels and buttons are always in the same order on the left side of
the Modify tab. Buttons enable/ disable as necessary.
• Modify tab name updates to reflect the active contextual tab appended.
• Contextual tab content is appended to the right side of the Modify tab when active.
• Modify and contextual contents are separated by a gray visual bar.
• Persistent access to core modify tools (Object-Action commands):
• Move
• Copy
• Rotate
• Mirror - Pick Axis
• Mirror - Draw Axis
• Delete
• Type Selector Enhancements
Type Selector is combined with the Properties Palette. Open at all times; can be
opened/closed using the Properties Palette button available in the Properties ribbon panel.
• Group Edit Mode access
Panel is removed from the ribbon and will float in drawing area when invoked. Default is upper
left corner of drawing area and can be moved.
• Model In-Place
Project ribbon replaced with the family ribbon when an in-place model is started or edited.
When you finish editing in-place, the ribbon will revert to the project ribbon.
• Improved icons based on user feedback
Large Team Workflow: Linked Models
• Enhancements to the Visibility Control of Worksets in Workshared Files:
• Visibility by Default for Worksets
• Ability to open/close Worksets for linked models
• Ability to control visibility of linked models according to host model
• Ability to apply View Filters to linked models from host model
• Ability to tag elements in linked files, with the exception of rooms, spaces, and areas
• MEP Element Interaction:
• Facilitates the copying of plumbing fixtures, lights, mechanical equipment, and air terminals
between linked models
• Reconcile Fixtures Browser to reconcile if a fixture has been moved, changed, or deleted
• Ability to automatically generate a ceiling grid from walls in a linked model
• Ability to apply View Filters to linked files
Graphics
• Realistic materials available in editable views
• Hardware acceleration (DX9) on by default
• Levels of Details (adaptive to zoom)
• Ambient occlusion
• Display performance improvements (over 30%)
• Significant performance improvement in display of mechanical and electrical drawings (up to
200%)
Materials
• Protein 2.0 appearances, in single project library
• Increased interoperability with 3ds Max through:
• Export of FBX files to Max with Protein 2 appearances
• Import of DWG files and ADSK files with Protein 2 appearances
Note3ds Max/Design 2011 is required for materials to transfer.
• Support for new realistic display style through Protein 2 materials
• New material classes available in Protein 2, including procedural appearances
Inventor Interoperability
• Support for oval duct, cable tray, and conduit connectors
• Support of new electrical properties (such as Motor)
• Improved performance when importing ADSK files
• Improved AEC Exchange functionality
• Support of Protein materials
Performance Improvements
• Graphics
• MultiCore Operations
• Sync with Central
• Model Open
• User interface reaction time
• Linked Models
• Electrical circuiting
DWG Export
• Increased visual fidelity when exporting Revit files to DWG
• Export option for True Color
• Export option for Text treatment
Family Editor Enhancements
• Interactive exploration of parameter values in Revit families
• Ability to lock labeled dimensions
• Reporting Parameters
Parameter Enhancements
• Default parameter type (length vs. text)
• Parameters groups automatically set
Temporary Dimension Enhancements
• Remembering witness lines
• Family Editor: right-click permanent dimensions to select labels
• Ability to control temporary dimension font size and background (transparent or opaque)
3D Alignment Enhancements
• Align tool now works on an element's node, vertex, edge, surface, form, or level
Expanded Region of High Geometric Accuracy
• Previous versions of Revit were unable to maintain the expected level of geometric accuracy at
locations farther than 1 mile from the project origin. Revit will now maintain a high level of
geometric accuracy for elements placed within 20 miles of the project origin.
Selection Enhancements
• Select All Instances in the current view or in the entire project
Text Notes Enhancements
• Additional leader attachment points: Top Left (TL), Middle Left (ML), Bottom Left (BL), Top Right
(TR), Middle Right (MR), and Bottom Right (BR).
• Ability to adjust leader end distance
• Ability to show box around text
• Ability to create bullets and numbering
Sheet Enhancements
• Create new sheet list rows to create placeholder sheets
• Convert placeholder sheets to project sheets
• Grid guide for sheets, enabling consistent sheet creation
Floor Enhancements
• Ability to set span direction for metal deck floors
Analysis
• Sun Path
• Interactive tool for visualizing the impact of natural light and shadows on buildings and sites
Xin thông baó với mọi ngươi một tin vui là bản Revit 2011 chuẩn bị xuất bản. Và theo thông tin của Autodesk công bí thì nó được cập nhật một số chức năng khá hay. Tuy chưa dùng, nhưng đọc qua thì thấy nó đạp ứng được thêm 40% (trong 100% mong muốn của cá nhân tồi với REVIT 2011).
Có thể nói trong Revit MEP thì E chưa được quan tâm lắm trong các bản trước, chính vì vậy E được ưu ái quan tâm cập nhật hơn.
Thời gian phát hành chính thức:
AutoCAD® Revit® Architecture Suite 2011 April 8
AutoCAD® Revit® MEP Suite 2011 April 8
AutoCAD® Revit® Structure Suite 2011 April 8
Autodesk® Revit® Structure 2011 April 8
Autodesk® Revit® Architecture 2011 April 8
AutoCAD® Structural Detailing 2011 April 8
Autodesk® Robot™ Structural Analysis 2011 April 12
Autodesk® Buzzsaw® April 17
AutoCAD® Civil 3D® 2011 April 20
Autodesk® Ecotect® Analysis April 20
Autodesk® Constructware® April 24
AutoCAD® Architecture 2011 March 25
AutoCAD® MEP 2011 March 25
AutoCAD® Map 3D 2011 March 29
Autodesk® Navisworks® Freedom 2011 April 2
Autodesk® Navisworks® Manage 2011 April 2
Autodesk® Navisworks® Simulate 2011 April 2
Xin tóm lược lại một số tính năng mới của Revit MEP 2011 (RAC, RST cũng tương tự).
Một số cải tiến chung:
- Đặt các đối tượng MEP trong các Elevation.(tôi đang mong đợi)
- Đặt các fittings/valves trong cả Section, Elevation. (tôi đang mong đợi)
- Khi vẽ hệ thống Piping mà thiết lập dùng nối bích (flange) thì mặt bích tự động được chèn vào. (tôi đang rất mong đợi - đàn anh của nó là AutoCAD MEP lầm tốt điều này)
- Thư viên Electric thêm mới nhiều.
Conduit and Cable Tray
- Có thêm conduit and cable tray (tôi đang rất mong đợi - đàn anh của nó là AutoCAD MEP lầm tốt điều này).
• Better, more complete coordination with other disciplines
• Model with or without fittings
• Adjustable bend radius for bends
• Schedule total length of run when not using fittings
• Surface connectors on equipment:
• Enable an entire surface to be connectable for conduit placement
• Added to the appropriate electrical equipment families
• Connect conduit to cable tray
Thuộc tính bảng Panel Schedule
- Định dạng theo templete.
- Lock circuits
- Group circuits
- Move circuits
- Cân bàng tải
Demand Factors (trong Manage/Electric Setting)
- Hỗi trợ thêm các tiêu chuẩn hệ số yêu cầu (Demand Factors) cho công nghiệp.
- Người dùng có thể tự định nghĩa loại tải.
- Tải yêu cầu được hiển thị trong bảng thống kê Tủ điện (panel schedules).
- Dùng Transfer Project Standards để copy.
Duct Oval
- Thêm loại ống oval
- Có thể dùng công cụ Sizing
Revit Extensions
- Chuyển đổi các tham số được chia sẻ (Shared Parameters)
- Model Review
- Autodesk Revit DB Link
Tài liệu trợ giúp người dùng:
- Chuyển tiếp trực tiếp đến web trợ giúp và có nhiều chức năng tìm kiếm nâng cao.
- Kèm những Video hướng dẫn ngắn rất trực quan.
- Các tooltip được tăng cường (số lượng, nội dung).
- Có thêm tooltip linh động mới.
- Phần phụ lục trong Help cho phần phân tích tính toán.
Anh văn cùi bắp dịch lâu quá, phù phù...
Các bác đọc tiếng Anh:
User Interface Enhancements
• Modeless Properties Palette
• Repeat last command / Repeat Commands recently used
• Quick Access Toolbar (QAT):
• Single QAT per application
• Increased number of default commands in the QAT
• Customization options via dialog box: move command up/down, add separator, remove
command
• Improved access to Worksets and Design Options on status bar
• Ribbon Enhancements:
• Redesigned Modify tab:
• Consistent modify tools - panels and buttons are always in the same order on the left side of
the Modify tab. Buttons enable/ disable as necessary.
• Modify tab name updates to reflect the active contextual tab appended.
• Contextual tab content is appended to the right side of the Modify tab when active.
• Modify and contextual contents are separated by a gray visual bar.
• Persistent access to core modify tools (Object-Action commands):
• Move
• Copy
• Rotate
• Mirror - Pick Axis
• Mirror - Draw Axis
• Delete
• Type Selector Enhancements
Type Selector is combined with the Properties Palette. Open at all times; can be
opened/closed using the Properties Palette button available in the Properties ribbon panel.
• Group Edit Mode access
Panel is removed from the ribbon and will float in drawing area when invoked. Default is upper
left corner of drawing area and can be moved.
• Model In-Place
Project ribbon replaced with the family ribbon when an in-place model is started or edited.
When you finish editing in-place, the ribbon will revert to the project ribbon.
• Improved icons based on user feedback
Large Team Workflow: Linked Models
• Enhancements to the Visibility Control of Worksets in Workshared Files:
• Visibility by Default for Worksets
• Ability to open/close Worksets for linked models
• Ability to control visibility of linked models according to host model
• Ability to apply View Filters to linked models from host model
• Ability to tag elements in linked files, with the exception of rooms, spaces, and areas
• MEP Element Interaction:
• Facilitates the copying of plumbing fixtures, lights, mechanical equipment, and air terminals
between linked models
• Reconcile Fixtures Browser to reconcile if a fixture has been moved, changed, or deleted
• Ability to automatically generate a ceiling grid from walls in a linked model
• Ability to apply View Filters to linked files
Graphics
• Realistic materials available in editable views
• Hardware acceleration (DX9) on by default
• Levels of Details (adaptive to zoom)
• Ambient occlusion
• Display performance improvements (over 30%)
• Significant performance improvement in display of mechanical and electrical drawings (up to
200%)
Materials
• Protein 2.0 appearances, in single project library
• Increased interoperability with 3ds Max through:
• Export of FBX files to Max with Protein 2 appearances
• Import of DWG files and ADSK files with Protein 2 appearances
Note3ds Max/Design 2011 is required for materials to transfer.
• Support for new realistic display style through Protein 2 materials
• New material classes available in Protein 2, including procedural appearances
Inventor Interoperability
• Support for oval duct, cable tray, and conduit connectors
• Support of new electrical properties (such as Motor)
• Improved performance when importing ADSK files
• Improved AEC Exchange functionality
• Support of Protein materials
Performance Improvements
• Graphics
• MultiCore Operations
• Sync with Central
• Model Open
• User interface reaction time
• Linked Models
• Electrical circuiting
DWG Export
• Increased visual fidelity when exporting Revit files to DWG
• Export option for True Color
• Export option for Text treatment
Family Editor Enhancements
• Interactive exploration of parameter values in Revit families
• Ability to lock labeled dimensions
• Reporting Parameters
Parameter Enhancements
• Default parameter type (length vs. text)
• Parameters groups automatically set
Temporary Dimension Enhancements
• Remembering witness lines
• Family Editor: right-click permanent dimensions to select labels
• Ability to control temporary dimension font size and background (transparent or opaque)
3D Alignment Enhancements
• Align tool now works on an element's node, vertex, edge, surface, form, or level
Expanded Region of High Geometric Accuracy
• Previous versions of Revit were unable to maintain the expected level of geometric accuracy at
locations farther than 1 mile from the project origin. Revit will now maintain a high level of
geometric accuracy for elements placed within 20 miles of the project origin.
Selection Enhancements
• Select All Instances in the current view or in the entire project
Text Notes Enhancements
• Additional leader attachment points: Top Left (TL), Middle Left (ML), Bottom Left (BL), Top Right
(TR), Middle Right (MR), and Bottom Right (BR).
• Ability to adjust leader end distance
• Ability to show box around text
• Ability to create bullets and numbering
Sheet Enhancements
• Create new sheet list rows to create placeholder sheets
• Convert placeholder sheets to project sheets
• Grid guide for sheets, enabling consistent sheet creation
Floor Enhancements
• Ability to set span direction for metal deck floors
Analysis
• Sun Path
• Interactive tool for visualizing the impact of natural light and shadows on buildings and sites